Chat with us, powered by LiveChat

FNIRSI DPOS350P 4-in-1 Oscilloscope 350MHz, Signal Gen, Analyzer

TO2333
Rating:
0%

3-5 Working days

380.00CHF
- +

FNIRSI DPOS350P – 4-in-1 Digital Oscilloscope with 350 MHz Bandwidth, 2 Channels, 50 MHz Signal Generator, Spectrum and Frequency Analyzer

FNIRSI DPOS350P – 4-in-1 Digital Oscilloscope with 350 MHz Bandwidth, 2 Channels, 50 MHz Signal Generator, Spectrum and Frequency Analyzer

Product Description (Rewritten)

The FNIRSI DPOS350P is a powerful 4-in-1 test instrument that combines a 350 MHz dual-channel digital phosphor oscilloscope, a 50 MHz signal generator, a 200 kHz–350 MHz spectrum analyzer, and a 50 MHz frequency response analyzer. It features a 1 GSa/s real-time sampling rate, 350 MHz bandwidth, and an ultra-fast waveform refresh rate, making it ideal for capturing even weak or complex signals.

Equipped with a 7-inch 1024×600 IPS touchscreen, the device offers sharp waveform displays and intuitive operation, perfect for labs, production lines, and field maintenance.

The built-in signal generator supports 14 standard and custom waveforms, while the spectrum analyzer covers frequencies from 200 kHz to 350 MHz – ideal for EMI and RF analysis.

Highlights:

  • High-voltage protection up to 400 V

  • Fast charging (QC 18 W, full in 2 hours)

  • Stores 500 waveforms & 90 screenshots

  • USB export for convenient analysis and reporting

    Oscilloscope

    Specification

    Value

    Channels

    2

    Bandwidth

    350 MHz

    Max Sampling Rate

    1 GSa/s

    Rise Time

    1 ns

    Input Impedance

    1 MΩ / 14 pF

    Vertical Sensitivity

    2 mV ~ 20 V (1X)

    Vertical Range

    16 mV ~ 160 V (1X)

    Time Base

    5 ns ~ 50 s

    Roll Time Base

    50 ms ~ 50 s

    Memory Depth

    60 Kpts

    Trigger Modes

    Auto / Single / Normal

    Trigger Channels

    CH1 / CH2

    Trigger Edge

    Rising / Falling

    Trigger Hold-off

    L1 ~ L3

    Trigger Level

    Manual / Auto (10–90%)

    Trigger Detection

    Digital

    Cursor Measurements

    Time, Frequency, Voltage, etc.

    Measurement Types

    12 types

    Digital Fluorescence

    Supported

    Color Temperature Display

    Supported

    Zoom Time Base

    Supported

    X-Y Mode

    Supported

    FFT Display

    Supported

    DC Accuracy

    ±2%

    Time Accuracy

    ±0.01%

    High Resolution Mode

    8-bit – 16-bit

    Overvoltage Protection

    Up to 400 V

    One-Key Auto Setup

    Supported

    One-Key Reset

    Supported

    Screenshot Storage

    90 images

    Waveform Storage

    500 groups

    Data Browser

    Supported

    Input Coupling

    DC / AC

    Probe Attenuation

    1X / 10X / 100X

    Grid Background

    Show / Hide

    Waveform Movement

    Coarse / Fine

    Waveform Brightness

    Adjustable


  • Signal Generator

    Specification Value
    Waveform Types 14 standard + captured waveforms
    Frequency 0 ~ 50 MHz (sine), other types up to 10M/5M/3M
    Amplitude 0 ~ 5 VPP
    Offset -2.5 V ~ +2.5 V
    Duty Cycle 0.1% – 99.9%
    Frequency Resolution 1 Hz
    Amplitude Resolution 1 mV
    Offset Resolution 1 mV
    Duty Cycle Resolution 0.1%
    Custom Waveform Storage 500 groups
  •  
    Frequency Response Analyzer

    Specification Value
    Excitation Frequency 100 Hz ~ 50 MHz
    Excitation Amplitude 0 ~ 5 VPP
    Excitation Offset -2.5 V ~ +2.5 V
    Number of Frequency Points 20 ~ 500
    Measurement Parameters Frequency / Gain / Phase
    Operating Mode Single / Cyclic
    System Calibration Supported
  •  

Spectrum Analyzer

Specification Value
Conversion Method FFT
FFT Length 4K ~ 32K
Frequency Range 200 kHz ~ 350 MHz
Amplitude Range -60 dBmV ~ +260 dBmV
Cursor Measurements Frequency / Amplitude
Marker Parameter Max Energy Harmonics
Waterfall Display Supported
3D Waterfall Supported
Auto Scaling Supported
System Calibration Supported


General Parameters

Specification Value
Boot Configurations 5 preset items
Charging Requirements QC18W – 12V/1.5A
Languages Chinese / English / Russian / Portuguese
Battery 3.7V, 800mAh lithium
Standby Time Approx. 3 hours
Charging Time Approx. 5 hours in standby
Power Consumption 10W
Cooling Air cooling
Device Size 190 × 128 × 37 mm
Display 7-inch, 1024×600 IPS
Operation Capacitive touchscreen
Extension Interface Capacitive touchscreen
Auto Power-Off 15 min ~ 1 hr / Off
Firmware Upgrade Supported (.iso image)

 

Package Contents – FNIRSI DPOS350P Oscilloscope

This oscilloscope kit includes essential accessories to support immediate and professional use.

  • DPOS350P Oscilloscope: 1 unit
  • 350 MHz Probe: 2 units
  • QC18W Charger: 1 unit
  • USB Cable: 1 unit
  • Alligator Clips: 1 set
  • User Manual: 1 unit
  • Packaging Box: 1 unit

Reviews

Write Your Own Review
You're reviewing:FNIRSI DPOS350P 4-in-1 Oscilloscope 350MHz, Signal Gen, Analyzer