TOOLTOP ET11S 24x32 2.8 inch thermal imaging camera AC DC 4000 counts multimeter -40 ~ 300 ℃ temperature measurement
Note:
1. This product uses a resistive display. It is recommended to use fingernails or a stylus instead of your fingertips when touching the screen.
2. The thermal imaging resolution is only 24x32 pixels, which is low. A large temperature difference is required for imaging. It is suitable for observing general temperature distributions, but not for complex inspections.
3. To correct inconsistencies, a mechanical control calibration plate is installed in front of the thermal imaging detector and calibrated every 10 seconds to ensure more accurate measurements. There is usually a pause of about 1-2 seconds, which is caused by the thermal imaging detector calibration. This is normal, so please don't worry.
Features:
【2-in-1 Function】: Thermal imaging camera + multimeter 2-in-1, one-click switching between the two functions, compact and small, lightweight and easy to carry.
【Touchscreen】2.8-inch resistive touchscreen operation.
【Data Transfer and PC Software Analysis】: In USB mode, it is possible to transfer locally stored thermal images and recorded multimeter measurement results to a memory card. These can then be viewed on a computer using PC software.
【Multifunctional】: The multimeter can measure DC voltage, AC voltage, resistance, diodes, on/off status, capacitance, etc.
【Battery Management】: Built-in lithium battery (supports USB charging), with automatic screen shutdown and auto power-off functions.
【Multifunctional】 Specifications:
Thermal Imaging Camera Parameters
Sensor: Uncooled focal plane
Image capture frequency: 16 Hz
Thermal image pixels: 24 x 32
Field of view: 55° (H) x 35° (V)
Emissivity: 0.1–0.99 adjustable
Measurement range: -40 to +300°C (ET11S)
Mode: Auto gain
Color palette: Iron red/Rainbow
Temperature measurement error: >0°C: ±2°C/±2% ≤0°C ±5°C/±5%
Temperature display accuracy: 0.1°C/0.1°F
Multimeter parameters
Maximum DC input voltage: 1000 V
Maximum AC input voltage: 750 V
Maximum measured resistance: 40 MΩ
Maximum capacitance measurement resistance: 100 µF
Duty cycle measurement range: 0.1%–99.9%
Diode measurement range: 0 V–1.5 V
Maximum on/off detection resistance: 30 Ω
Counts:
4000 counts, refreshed: 3 times per second (ET11S)
Other parameters
Screen: 2.8 inches
Touchscreen: Resistive touchscreen
USB interface: Type-C
Memory capacity: 3.5 MB
Image format: BMP
Battery: Built-in Lithium battery
Storage temperature: -20~60℃ (-4~140℉)
Operating temperature: 0-50℃ (32-122℉)
Operating humidity: <85% RH (non-condensing)
Product size: 134 * 69 * 25 mm
Product weight: 125 g
Package contents:
1 x Thermal imaging multimeter
1 x Pair of test leads
1 x User manual
1 x Box
Reviews
Write Your Own Review
